Thincell 1/2” (13mm) cube plastic louvers are accepted as the worldwide standard. Thincell provides efficiency, economy and moderately controlled luminances. These panels feature shiplap perimeter detailing to facilitate an unbroken appearance when parts are butt joined in continuous row application.

SLP‘s Thincell™ TC is an injection molded cube louver that offers unequalled efficiency, economy and dimensional versatility. Standard finishes include opaque white, black and specular silver. TC is molded in both 2’ x 4‘ and metric panel sizes. The nominal 3/8” (7.6mm) thickness offers an important freight advantage when cube and container capacity is an issue. All molded sizes include a half lap perimeter detail that facilitates continuous row applications with an unbroken appearance.

Specially molded for metric sizes.
Cells of the T3-M6 are not perfectly square as they approach the perimeter of the eggcrate. T3-M6 Cell Size: 1/2” X 1/2” X 3/8” (14 x 14 x 9.5mm) Panel Size:  24-5/16” x 49” (618 x 1243 mm). TC-M5 Cell Size: Nominal 5/8” X 5/8” X 3/8” (16 x 16 x 7.6mm) Panel Size:  23-1/4” x 47” (595 x 1195 mm)

Thincell™ Aluminum louvers offer a simple means of achieving a desired cut-off while maintaining compliance with strict fire codes. Stock parts are available with cell sizes of 1/2” x 1/2” x 1/2” (13 x 13 x 13mm) and 1” x 1” x 1” (25 x 25 x 25mm) each of which provide 45° cut-off and are available in a number of finishes and panel sizes. Cell configurations from 1/2” x 1/2” x 1” (13 x 13 x 25mm) up to 2” x 2” x 2” (50.8 x 50.8 x 50.8mm) are also available to meet special lighting and ceiling requirements. Luminances are not suited for computer VDT intensive areas.

Decorona™ 33 and 50 offer the original “circle within a square motif” that has been copied but never equaled. This marriage of geometric forms produces a pleasing array of contrasting luminances and surfaces. The parabolic cone‘s completely uniform low brightness cut-off is set off by the square cell’s slightly elevated reflections.

SLP‘s Parahex P6’s® hexagonal cells offer equally high degrees of brightness control in the parallel, perpendicular and diagonal zones. 3/4” X 3/4” X 1/2” (19 x 19 x 12.7mm) flat back cells produce less than half the luminance in the 45° zone than competing products.

Angleflex™ is the most sophisticated injection molded directional louver available. This louver is designed for those special applications that require highly restricted distribution in one direction, the majority of distribution in the opposite direction and 45° cut-off in the perpendicular plane.

Frost LED Overlay is .080” thick that provides a soft white satin appearance for a variety of lighting applications. It combines high efficiency with excellent diffusing properties making it an excellent choice for LED lighting applications. Light Transmission: 95%

Prismatic Pattern 12 is undoubtedly the most widely recognized lighting medium available. This extruded lens features .187” (4.7mm) female prisms that offer excellent efficiencies while maintaining 87% of the light output in the 0-60° zone. PR12 is available in numerous thicknesses, materials and panel sizes.

SLP‘s extruded Prismatic Pattern 15 is designed specifically to span large openings without any objectionable sag. The 3/8” (9.5mm) square based female prisms not only provide structural rigidity but also offer an orderly appearance. PR15 is the only lens for large openings that offers high efficiencies, controlled luminance and rigidity. With a light transmission of approx. 83%, the prisms are oriented perpendicular to the width and length.

SLP‘s extruded Prismatic Pattern 19 lens offers the light control of an injection molded lens at a fraction of the cost. The 3/16” (4.7mm) square-based male prisms suppress luminance at critical angles and delivers 92% of the light output to the 0-60° zone. PR19 is one of the best alternatives when brightness control is a consideration but parabolic louvers are not required.

The RFK2 retrofit kit exemplifies both simplicity and function. The sturdy steel frame is installed onto a standard inverted tee system, the luminaire returned to its original position but now on top of the frame and the door containing your choice of light control media can then be installed. The door is supported by integral pin hinges and is fastened with cam latches. The majority of louvers and all lenses can easily be adapted to fit the door. RFK2 is an easy choice for areas that contain missing, damaged and mismatched luminaire door frames.